Search
AMM.com Copying and distributing are prohibited without permission of the publisher
Email a friend
  • To include more than one recipient, please separate each email address with a semi-colon ';', to a maximum of 5

  • By submitting this article to a friend we reserve the right to contact them regarding AMM subscriptions. Please ensure you have their consent before giving us their details.


Volvo’s reversal is a speed bump for market growth

Keywords:


While those trying to grow the market for copper-nickel tubing in automotive hydraulic brake lines often point to Sweden's Volvo Car Corp. as a big success story, one thing they often neglect to mention is that while the European automaker was one of the first to use the product, it no longer does so.

Anders Larin, Volvo's deputy manager of chassis brake system/pedals, said that copper-nickel tubing proved to be a very successful solution to the brake line corrosion problem that the automaker experienced before switching from uncoated "Bundy" tubing in 1970 and the potential safety issues that could have ensued.

Periodic inspections of the brake lines in Volvo vehicles had revealed corrosion, and Larin said there were concerns that with such corrosion there could be a leakage of brake fluid and subsequent brake failure.

"We had no complaints at all with the copper-nickel product, but it was much more expensive," he said. "Because of that, and advances in steel tube coatings, we stopped using copper-nickel in 2002," switching to steel tubing with an aluminum/polymer epoxy coating. "It fulfilled our requirements but was less expensive" and more available. Adding to the expense of the copper-nickel product was the brass nipples that the automaker needed to use at the ends of the brake line.

"Copper-nickel tubing was also hard to get hold of," Larin said. "There are very few producers that make it in the diameters we need."

Volvo isn't having the same problem with aluminum/epoxy-coated steel tubing, he said. "We are very satisfied with its performance. We haven't had any failures with the product. We have no plans to go back to copper-nickel."


Have your say
  • All comments are subject to editorial review.
    All fields are compulsory.



Latest Pricing Trends Year Over Year

Poll

After witnessing the pace of steel plant idlings and worker layoffs during the first half of the year, what is your view of the second half of 2015? (choose one)

No matter what else happens, layoffs and shutdowns, etc., have nearly or essentially stopped for the year.
The environment will change little and the pace of layoffs will continue at a similar rate as the first half of 2015.
The environment will change little yet the pace of layoffs will begin to slow slightly to moderately.
The environment will change little yet the pace of layoffs could exceed the rate seen thus far.
The environment will improve slightly to moderately yet hiring and plant restarts will not resume this year.
The environment will improve slightly to moderately, with hiring and plant restarts commencing.
The environment will improve dramatically yet hiring and plant restarts will still be negligible in comparison.
The environment will improve dramatically yet hiring and plant restarts will only be slight to moderate.
The environment will improve dramatically, with hiring and plant restarts occurring nearly in tandem.


View previous results