You are currently viewing the beta version of the new AMM site. Click here to return to the current site.
Results 1-10 of 44 for Frag. (0.026257 seconds)
relevance / newest first / oldest first
... "Most EFs are not going to all of a sudden switch to an all-frag (shred) heat, which is cheaper and has better supply," he said. ... View this article
... "Frag is being led down by a couple of big shippers. The down $20 to $25 on frag and obsolete grades will stick and spring ... View this article
... The rise of frag: One major change in the domestic scrap market during the past five years has been the ascendancy of shredded scrap. ... View this article
... There's enough prime out there to meet demand or exceed it. But No. 2 frag (shred) is propping up the market," he said. ... View this article
... "Some mills have the ability to shift melt practices and use more prime, but some don't have as much flexibility or still prefer to use frag (shred) over ... View this article
... "I was thinking of going down $40 or $45 on frag, but then put out $50 and it stuck," he said. "It was easy to buy at down $50. ... View this article
... Floated frag dipped on the top end to €1,350-1,420 per tonne from €1,350-1,440 previously, while mixed turnings and cast both fell by €10 on ... View this article
... Floated frag slipped to €1,350-1,440 per tonne from €1,360-1,450 previously; cast fell to €1,260-1,360 per tonne from €1,280-1,380; and mixed ... View this article
... prices. "After offering down $10 on heavy melt and frag, the broker/ producer pulled back," a fourth source said. A large St. ... View this article
... In that case, the difference stands at about $32, slightly below last year's $38 spread between frag materials and bundles and busheling. ... View this article
1 | 2 | 3 | 4 | 5
What is causing the most weakness to the U.S. metals industry?
June 20-21, 2013 New York
We try to get the information we can, but we're not sure what's mandated.
--Tin trader