You are currently viewing the beta version of the new AMM site. Click here to return to the current site.
Results 1-10 of 1000 for sections. (0.254456 seconds)
relevance / newest first / oldest first
... The product comes in longer lengths than traditional steel line pipe, which is in 40-foot sections, allowing for more efficient installation. ... View this article
NEW YORK — Hollow structural sections (HSS) mills are raising prices, but not in a uniform manner, market sources told AMM. ... View this article
... Spirit builds the A350 composite center fuselage section, along with the composite front wing spar, at its facility in Kinston, NC Fuselage panels are ... View this article
... Its rolling mill is able to produce 500,000 tonnes per year of finished steel, including 100,000 tonnes per year of small sections. ... View this article
... Wire rod imports tumbled by 75.1 percent to 6,359 tonnes in May compared with last May's 25,604 tonnes, while imports of sections were down ... View this article
... the second generation of São José dos Campos, Brazil-based Embraer's E-Jet, for which it will design and build the center fuselage section III, rear ... View this article
has criticized hollow structural sections (HSS) mills that raised their prices by only $30 per ton, undercutting a leading $50-per-ton increase by JMC ... View this article
... Since the closures, the official queue waiting to pass through the affected section had grown to eight tug- or towboats moving 63 barges, but the ... View this article
NEW YORK — Several domestic mills' efforts to raise hollow structural sections (HSS) by $50 per ton have gotten off to a rocky start, with at least ... View this article
... At least seven other domestic mills boosted prices for hollow structural sections (HSS) and mechanical tubing products by a minimum of $50 per ton ... View this article
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | Next
What is causing the most weakness to the U.S. metals industry?
June 20-21, 2013 New York
Our industry and the U.S. economy are not realizing the full benefits of (higher steel demand) due to recent significant surges of imported tubular products.
--Mario Longhi, U.S. Steel