You are currently viewing the beta version of the new AMM site. Click here to return to the current site.
Results 1-10 of 145 for surface grinding. (0.048733 seconds)
relevance / newest first / oldest first
... "Seventy percent of the world's surface is covered ... are ridiculously mineral-rich, and it only makes sense to not only get them out of the ground but to ... View this article
... What materials are gaining ground at the fastest rate? ... Inner Circle: Is there anything interesting happening in surface treatments? ... View this article
... hand grinder," he explained. "The point is to improve surface quality. (The mills) then roll the material into coil form.". In addition to its grinding facility ... View this article
... melt, form, fabricate or manufacture has found its way to the surface of the ... top speed of about 1.5 inches per second on flat, hard ground, moves on ... View this article
... an environmental permit that will allow it to break ground on the new ... from Red Bud Industries Inc., will feature Eco Pickled Surface (EPS) technology ... View this article
... of the Manitoba steel mill, bright bar and Duluth grinding ball facilities ... at Gerdau, we support the long-term funding of the surface transportation bill. ... View this article
... goods (OCTG) prices are expected to lose further ground, some distributors ... Average prices for J55 tubing, production casing and surface casing all ... View this article
... iron mineralisation at surface between 30% and 40% Fe. Although detailed field mapping, regional aeromagnetics and ground magnetic work still ... View this article
... we could have known something was amiss when reports surfaced a few ... showing that the anti-bailout parties are actually gaining ground over their ... View this article
... together to turn the bit and carry fluids down to bring cuttings to the surface. ... all but dead in the wake of the 2008-09 recession, sits at ground zero of ... View this article
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | Next
What is causing the most weakness to the U.S. metals industry?
June 20-21, 2013 New York
We try to get the information we can, but we're not sure what's mandated.
--Tin trader